SANSUI MODEL K2K 21 DETAILS

A complete parts list of SANSUI MODEL K2K 21. With circuit diagram ,
service code, system ic, croma ic, memory ic, power, smps transformer, eht,
horizontal output , horizontal oscillator coil, vertical ic, audio ic, tunner,
Remote, service mode and many more....

SYSTEM + CROMA = TDA9370PS/N3/A/1932

MEMORY = 24C16

POWER = C4460

SMPS TRANSFORMER =  TM 0065-------OL

EHT =  TF0107---OU  090512 5-29A

HOR O/P =  TT 2142

HOR OSC COIL = T00004-OL

VERTICAL =  STV 9302

AUDIO = TDA 7297

TUNER =  TEA G025D 1007A2111

REMOTE =  SP1-02

SERVICE MODE =

MAKE A TORCH WITH 9V UNUSED BATTERY

 Its a simple project or not for you but really its a good working or recycling of 9v battery .
9v battery trough away after discharge or unnecessary for electronics device such as multimeter, Radio, Walkies, 
Here we need to collect some electronics component
( 1 ) A 9V Battery
( 2 ) 22 Ohems Resistor
( 3 ) Micro Switch
( 4 ) White LED

Connected Each are as shown in feagure

BPL MODEL -NXR-60XA1 KZX, BTR-60TA1 KYX

Entering into service Mode
Press and hold the ( FUNCTION) button on the TV set and Press the ( 1 ) button on the remote control handset.

Following setting items appers on the screen.

                                                                                                               ANOTHER SERVICE MODE

BPL MODEL FGR- 23GBI

Press and Hold the ( Vol - ) button on the Tv set till the sound level displayed on the screen is "0"
Press (Recall ) button on Remote Handset and (Vol - ) button on Tv set simultaneously to obtain the following appearance on the screen.

                                                                                                             ANOTHER SERVICE MODE

BPL MODEL- FER -64RA1

Entering into Service Mode
1. Press and hold the (Menu ) button on the TV set and press the (1) button on the remote control handset following setting items appears on the screen.



                                                                                                                  ANOTHER SERVICE MODE

BPL MODEL-KSR -22SA1 SERVICE MODE

Entering into service mode
press (MENU) button on TV set and then press button (1) on Remote Handset to enter into service mode
Cancellation of service Mode
To exit from service Mode Press (Menu) button on Remote Handset/ TV set.
                                                                                                                          OTHER SERVICE CODE

BPL MODEL - FEV-63EA1 SERVICE CODE

Entering into Service Mode

Press and hold the (Menu ) button on the TV set and press the (1) button on the remote control handset. Following display appears on the screen.


                                                                                                                 ANOTHER SERVICE MODE

polaris 11 watt CFL BULB REPAIRING TIPS

HOW TO REPAIR A CFL BULB/ TUBE CKT WITH CKT DIAGRAM IN DETAILS.....

ANOTHER CFL BULB CIRCUIT DIAGRAM WITH DETAILS

BIGLUZ 20 WATT       BROWNIEX 20 WATT       EUROLITE 23 WATT      IKEA 7 WATT   IMMEDIATELY 25 WATT      ISOTRONIC 25 WATT     LUXAR 11 WATT    LUXTEK 8 WATT     MAYWAY 11 WATT       MAXILUX 15 WATT      OSRAM 11 WATT     OSRAM 21 WATT     OSRAM DULUX STAR 11 WATT      PHILIPS 11 WATT      PHILIPS GENIE 11 WATT     PHILIPS 14 WATT   

philips genie14 watt CFL BULB REPAIRING TIPS

HOW TO REPAIR A CFL BULB/ TUBE CKT WITH CKT DIAGRAM IN DETAILS.....

ANOTHER CFL BULB CIRCUIT DIAGRAM WITH DETAILS

BIGLUZ 20 WATT       BROWNIEX 20 WATT       EUROLITE 23 WATT      IKEA 7 WATT   IMMEDIATELY 25 WATT      ISOTRONIC 25 WATT     LUXAR 11 WATT    LUXTEK 8 WATT     MAYWAY 11 WATT       MAXILUX 15 WATT      OSRAM 11 WATT     OSRAM 21 WATT     OSRAM DULUX STAR 11 WATT      PHILIPS 11 WATT      PHILIPS GENIE 11 WATT        POLARIS 11 WATT








Searches related to compact fluorescent lamp compact fluorescent lamp working compact fluorescent lamp pdf compact fluorescent lamp vs fluorescent lamp compact fluorescent lamp circuit diagram compact fluorescent lamp philips compact fluorescent lamp vs led compact fluorescent lamp advantages and disadvantages compact fluorescent lamp ppt circuit diagram of cfl bulb cfl circuit diagram pdf philips cfl circuit diagram compact fluorescent schematic cfl circuit operation cfl driver circuit cfl schematic circuit schematic of cfl bulb

philips genie 11watt CFL BULB REPAIRING TIPS

HOW TO REPAIR A CFL BULB/ TUBE CKT WITH CKT DIAGRAM IN DETAILS.....

ANOTHER CFL BULB CIRCUIT DIAGRAM WITH DETAILS

BIGLUZ 20 WATT       BROWNIEX 20 WATT       EUROLITE 23 WATT      IKEA 7 WATT   IMMEDIATELY 25 WATT      ISOTRONIC 25 WATT     LUXAR 11 WATT    LUXTEK 8 WATT     MAYWAY 11 WATT       MAXILUX 15 WATT      OSRAM 11 WATT     OSRAM 21 WATT     OSRAM DULUX STAR 11 WATT      PHILIPS 11 WATT           PHILIPS 14 WATT     POLARIS 11 WATT

philips 11watt CFL BULB REPAIRING TIPS

HOW TO REPAIR A CFL BULB/ TUBE CKT WITH CKT DIAGRAM IN DETAILS.....

ANOTHER CFL BULB CIRCUIT DIAGRAM WITH DETAILS

BIGLUZ 20 WATT       BROWNIEX 20 WATT       EUROLITE 23 WATT      IKEA 7 WATT   IMMEDIATELY 25 WATT      ISOTRONIC 25 WATT     LUXAR 11 WATT    LUXTEK 8 WATT     MAYWAY 11 WATT       MAXILUX 15 WATT      OSRAM 11 WATT     OSRAM 21 WATT     OSRAM DULUX STAR 11 WATT           PHILIPS GENIE 11 WATT     PHILIPS 14 WATT     POLARIS 11 WATT

osram dulux star 11watt CFL BULB REPAIRING TIPS

HOW TO REPAIR A CFL BULB/ TUBE CKT WITH CKT DIAGRAM IN DETAILS.....

ANOTHER CFL BULB CIRCUIT DIAGRAM WITH DETAILS

BIGLUZ 20 WATT       BROWNIEX 20 WATT       EUROLITE 23 WATT      IKEA 7 WATT   IMMEDIATELY 25 WATT      ISOTRONIC 25 WATT     LUXAR 11 WATT    LUXTEK 8 WATT     MAYWAY 11 WATT       MAXILUX 15 WATT      OSRAM 11 WATT     OSRAM 21 WATT        PHILIPS 11 WATT      PHILIPS GENIE 11 WATT     PHILIPS 14 WATT     POLARIS 11 WATT

osram 21 watt CFL BULB REPAIRING TIPS

HOW TO REPAIR A CFL BULB/ TUBE CKT WITH CKT DIAGRAM IN DETAILS.....

ANOTHER CFL BULB CIRCUIT DIAGRAM WITH DETAILS

BIGLUZ 20 WATT       BROWNIEX 20 WATT       EUROLITE 23 WATT      IKEA 7 WATT   IMMEDIATELY 25 WATT      ISOTRONIC 25 WATT     LUXAR 11 WATT    LUXTEK 8 WATT     MAYWAY 11 WATT       MAXILUX 15 WATT      OSRAM 11 WATT     OSRAM DULUX STAR 11 WATT      PHILIPS 11 WATT      PHILIPS GENIE 11 WATT     PHILIPS 14 WATT     POLARIS 11 WATT

osram 11watt CFL BULB REPAIRING TIPS

HOW TO REPAIR A CFL BULB/ TUBE CKT WITH CKT DIAGRAM IN DETAILS.....

ANOTHER CFL BULB CIRCUIT DIAGRAM WITH DETAILS

BIGLUZ 20 WATT       BROWNIEX 20 WATT       EUROLITE 23 WATT      IKEA 7 WATT   IMMEDIATELY 25 WATT      ISOTRONIC 25 WATT     LUXAR 11 WATT    LUXTEK 8 WATT     MAYWAY 11 WATT       MAXILUX 15 WATT          OSRAM 21 WATT     OSRAM DULUX STAR 11 WATT      PHILIPS 11 WATT      PHILIPS GENIE 11 WATT     PHILIPS 14 WATT     POLARIS 11 WATT

maxilux 15 watt CFL BULB REPAIRING TIPS

HOW TO REPAIR A CFL BULB/ TUBE CKT WITH CKT DIAGRAM IN DETAILS.....

maway 11watt CFL BULB REPAIRING TIPS

HOW TO REPAIR A CFL BULB/ TUBE CKT WITH CKT DIAGRAM IN DETAILS.....

ANOTHER CFL BULB CIRCUIT DIAGRAM WITH DETAILS

BIGLUZ 20 WATT       BROWNIEX 20 WATT       EUROLITE 23 WATT      IKEA 7 WATT   IMMEDIATELY 25 WATT      ISOTRONIC 25 WATT     LUXAR 11 WATT    LUXTEK 8 WATT         MAXILUX 15 WATT      OSRAM 11 WATT     OSRAM 21 WATT     OSRAM DULUX STAR 11 WATT      PHILIPS 11 WATT      PHILIPS GENIE 11 WATT     PHILIPS 14 WATT     POLARIS 11 WATT

luxtek 8watt CFL BULB REPAIRING TIPS

HOW TO REPAIR A CFL BULB/ TUBE CKT WITH CKT DIAGRAM IN DETAILS.....

ANOTHER CFL BULB CIRCUIT DIAGRAM WITH DETAILS

BIGLUZ 20 WATT       BROWNIEX 20 WATT       EUROLITE 23 WATT      IKEA 7 WATT   IMMEDIATELY 25 WATT      ISOTRONIC 25 WATT     LUXAR 11 WATT       MAYWAY 11 WATT       MAXILUX 15 WATT      OSRAM 11 WATT     OSRAM 21 WATT     OSRAM DULUX STAR 11 WATT      PHILIPS 11 WATT      PHILIPS GENIE 11 WATT     PHILIPS 14 WATT     POLARIS 11 WATT

luxar 11w CFL BULB REPAIRING TIPS

HOW TO REPAIR A CFL BULB/ TUBE CKT WITH CKT DIAGRAM IN DETAILS.....

ANOTHER CFL BULB CIRCUIT DIAGRAM WITH DETAILS

BIGLUZ 20 WATT       BROWNIEX 20 WATT       EUROLITE 23 WATT      IKEA 7 WATT   IMMEDIATELY 25 WATT      ISOTRONIC 25 WATT         LUXTEK 8 WATT     MAYWAY 11 WATT       MAXILUX 15 WATT      OSRAM 11 WATT     OSRAM 21 WATT     OSRAM DULUX STAR 11 WATT      PHILIPS 11 WATT      PHILIPS GENIE 11 WATT     PHILIPS 14 WATT     POLARIS 11 WATT

isotronic 11w CFL BULB REPAIRING TIPS

HOW TO REPAIR A CFL BULB/ TUBE CKT WITH CKT DIAGRAM IN DETAILS.....

ANOTHER CFL BULB CIRCUIT DIAGRAM WITH DETAILS

BIGLUZ 20 WATT       BROWNIEX 20 WATT       EUROLITE 23 WATT      IKEA 7 WATT   IMMEDIATELY 25 WATT      LUXAR 11 WATT    LUXTEK 8 WATT     MAYWAY 11 WATT       MAXILUX 15 WATT      OSRAM 11 WATT     OSRAM 21 WATT     OSRAM DULUX STAR 11 WATT      PHILIPS 11 WATT      PHILIPS GENIE 11 WATT     PHILIPS 14 WATT     POLARIS 11 WATT

immediately 25w CFL BULB REPAIRING TIPS

HOW TO REPAIR A CFL BULB/ TUBE CKT WITH CKT DIAGRAM IN DETAILS.....

ANOTHER CFL BULB CIRCUIT DIAGRAM WITH DETAILS

BIGLUZ 20 WATT       BROWNIEX 20 WATT       EUROLITE 23 WATT      IKEA 7 WATT       ISOTRONIC 25 WATT     LUXAR 11 WATT    LUXTEK 8 WATT     MAYWAY 11 WATT       MAXILUX 15 WATT      OSRAM 11 WATT     OSRAM 21 WATT     OSRAM DULUX STAR 11 WATT      PHILIPS 11 WATT      PHILIPS GENIE 11 WATT     PHILIPS 14 WATT     POLARIS 11 WATT

ikea 7w CFL BULB REPAIRING TIPS

HOW TO REPAIR A CFL BULB/ TUBE CKT WITH CKT DIAGRAM IN DETAILS.....

ANOTHER CFL BULB CIRCUIT DIAGRAM WITH DETAILS

BIGLUZ 20 WATT       BROWNIEX 20 WATT       EUROLITE 23 WATT       IMMEDIATELY 25 WATT      ISOTRONIC 25 WATT     LUXAR 11 WATT    LUXTEK 8 WATT     MAYWAY 11 WATT       MAXILUX 15 WATT      OSRAM 11 WATT     OSRAM 21 WATT     OSRAM DULUX STAR 11 WATT      PHILIPS 11 WATT      PHILIPS GENIE 11 WATT     PHILIPS 14 WATT     POLARIS 11 WATT

eurolite 23w CFL BULB REPAIRING TIPS

HOW TO REPAIR A CFL BULB/ TUBE CKT WITH CKT DIAGRAM IN DETAILS.....

ANOTHER CFL BULB CIRCUIT DIAGRAM WITH DETAILS

BIGLUZ 20 WATT       BROWNIEX 20 WATT         IKEA 7 WATT   IMMEDIATELY 25 WATT      ISOTRONIC 25 WATT     LUXAR 11 WATT    LUXTEK 8 WATT     MAYWAY 11 WATT       MAXILUX 15 WATT      OSRAM 11 WATT     OSRAM 21 WATT     OSRAM DULUX STAR 11 WATT      PHILIPS 11 WATT      PHILIPS GENIE 11 WATT     PHILIPS 14 WATT     POLARIS 11 WATT

browniex 20w CFL BULB REPAIRING TIPS

HOW TO REPAIR A CFL BULB/ TUBE CKT WITH CKT DIAGRAM IN DETAILS.....

ANOTHER CFL BULB CIRCUIT DIAGRAM WITH DETAILS

BIGLUZ 20 WATT             EUROLITE 23 WATT      IKEA 7 WATT   IMMEDIATELY 25 WATT      ISOTRONIC 25 WATT     LUXAR 11 WATT    LUXTEK 8 WATT     MAYWAY 11 WATT       MAXILUX 15 WATT      OSRAM 11 WATT     OSRAM 21 WATT     OSRAM DULUX STAR 11 WATT      PHILIPS 11 WATT      PHILIPS GENIE 11 WATT     PHILIPS 14 WATT     POLARIS 11 WATT

bigluz 20w CFL BULB REPAIRING TIPS

HOW TO REPAIR A CFL BULB/ TUBE CKT WITH CKT DIAGRAM IN DETAILS.....

Compact fluorescent lamp Bigluz 20W use classic wiring with a small changes. Values of parts are modified for bigger power.





ANOTHER CFL BULB CIRCUIT DIAGRAM WITH DETAILS
    BROWNIEX 20 WATT       EUROLITE 23 WATT      IKEA 7 WATT   IMMEDIATELY 25 WATT      ISOTRONIC 25 WATT     LUXAR 11 WATT    LUXTEK 8 WATT     MAYWAY 11 WATT       MAXILUX 15 WATT      OSRAM 11 WATT     OSRAM 21 WATT     OSRAM DULUX STAR 11 WATT      PHILIPS 11 WATT      PHILIPS GENIE 11 WATT     PHILIPS 14 WATT     POLARIS 11 WATT

how to make a night lamp with good knight mosquito vaporizer

After finish a Good Knight Liquid Mosquito Vaporiser you can use as a knight lamp
Requirement parts =
1 = 1N4007 X 4Pcs
2 = 4.7 Ohems
3 = 474pf 400v
4 = White LED
Open the Vaporiser

Reliance Big tv Troubleshooting You can repair your Reliance Big tv

Some solution of  ---

reliance big tv first installation problem

reliance big tv set top box problem
reliance big tv channel list

reliance big tv customer care number

reliance big tv packages

reliance big tv login

reliance big tv recharge packages

reliance big tv complaints

No Sound

possible cause
1 A/V connection not proper.
2 STB/TV Volume level 0.
3 STB/TV 'Mute' active.
action
1.Perform channel change.
2.Check& set volume level on STBITV.
3.UnmutetheSTBlTV.
4 .Ch eckA/V con n ection & Cable at both
5.Perform standby operation.
6. Perform Power recycle to STB.
7.Perform Red Key long press (Factory Reset).
8.Perform Force OTA.
9.Perform FF5 erase.
1O.Replace STB.

Remote LED indicator on STB

possible cause
1 .Remote Malfunction.
2. Incorrect battery polarity.
3. Key pad stuck.
action
1 .Hold & operate the remote in proper direction.
2.Check& correct the battery polarity.
3.Replace the battery.
4.Perform power recycle to STB.
5.Perform FFS erase.
6.Replace remote control.
7.Repalace STB.
8.Remove Stuck Key from remote.

LED on front panel doesn’t lightup

possible cause

*Power not Supplied

action
1 Verify Power adaptor plu gged in properly at both end.( at 230 VAC socket & Backside of STB DC jack).
2.VerifysupplyisOK(23OVAC).
3.Replace power adaptor.
4.Replace STB.

Only BigTV Logo on screen

possible cause
*STB in Hang state
action
1 Perform channel change.
2.Perform power recycle to STB.
3.Perform Red Key long Press (Factory Reset).
4.Perform Force OTA.
5.Perform FF5 erase.
6.Replace STB.

1 Complete black screen./ 2. Few channels black screen.

possible cause
1.AV connection notproper.
2.ln correct TV source.
3.Signal strength Low.
action
1 Switch on the STB from Standby mode.
2.Perform power recycle to STB.
3.Check AV cable & its connection.
4.Check TV selection on AV mode.
5.Perform Red key long prees (Factory Reset).
6.Perform Force OTA.
7.Perform FFS erase.
8.Replace STB.
9.Check dish alignment.

Signal Strength (Signal lost issue)

possible cause
1. Cloudy/ rainy atmosphere.
2. Dish alignment issue.


action
1 Wait for clear atmosphere.
2.Check signal strength atLNBEinputporton STB.
3.Trytochangethechannel.
4.Pertorm standby operation.
5.Perform Powerrecycle to STB.
6.Pertorm Red Key long Press(Factory Reset).
7.Perform Eorce OTA.
8.Perform EES erase.
9.Ch eckfor Dish alignment.
10.Replace STB.

Channel not available/ 1 Few channel available/ 2.Only preview (100 ) & Gyan darshan (556) available/ 3.No channel available/ 4.Smartcard error on screen

possible cause
1 .Unsubscribed channel.
2.SmartCard not inserted properly.
3.Smartcard connectivity issue.
4.Smartcard defective/ damage.

action
1.Confirm the channel subscription.
2.Check the Balance of particular SCN.
3.Check ,clean & reinsert the SCN with correct direction.
4.Perform channel change.
5.Perform stan dby operation.
6.Perform power recycle to STB.
7.Perform SCN flush from back end.
8.Perform force OTA.
9.Perform FFS & NG erase.
10.Replace smart card.
11.Replace STB.

Video out is not available on Component

possible cause
1. Connection between TV to STB is not proper.
2. TV resolution problem.
action
1 .Check & correct the connecting wire.
2.Check forTV selected in Component mode.
3.Check forTV resolution.

In HDMI mode no picture

possible cause *HDMI cable faulty.

action 1.Check for connection between STB & TV. 2.Check for cable version (Recommended V-1.3).

Videocon D2h Troubleshooting You can repair your Videocon D2h

 videocon dth, videocondth, videocon satellite tv, videocon d2h recharge offers, videocon digital tv, videocon d2h new connection, videocon d2h recharge plans, videocon d2h problem in signal reception

INSERT Satellite Card message appears on the screen.

action
• Please insert the Satellite Card in the slot.
• Switch OFF and ON your Satellite LCD/TV/DVD/Box.
• If problem persists, please replace the viewing card.

Blank Screen. action

• Check connection of Satellite LCD/TV/DVD/Box with the TV set.

The remote control doesn’t work. action

• Open the rear panel of remote control. Check if proper batteries (A A sizes) are inserted.
• If the problem persists, check to see for proper connection of batteries.
• If remote control still does not work, replace the old batteries with new ones.
• Ensure that there is no obstacle between the Satellite LCD/TV/DVD/Box remote control and Satellite LCD/TV/DVD/Box unit.

Satellite LCD/TV/DVD/Box does not show POWER ON (No Indicator). action

• Check for AC Mains Power switch if it is off. Please switch it on.
• Try and use different plug point.
• Be sure the power cord is plugged in and there is power.

DO’S and DON’TS.

action • Do not drop, knock or shake the Satellite LCD/TV/DVD/Box or the remote. Rough handling can cause damage to the delicate electronic components. • Do not attempt to repair or service the Satellite LCD/TV/DVD/Box or the remote control. Any such tampering with the devices may result in serious malfunctioning as a result of which the warranty shall be void. • Do not use harsh chemicals or detergents to clean the Satellite LCD/TV/DVD/Box. Wipe it with a soft and dry cloth. • Do not allow any kind of liquid to come in contact with the Satellite LCD/TV/DVD/Box. • Only authorized BBCL trained personnel are authorized to conduct repairs. • Non compliance of above can result in the warranty being null and void. • Please make sure that the air vents of the box are not covered by anything to avoid temperature jam in the device. We recommend about 40 cm free space on the top of the Satellite LCD/TV/DVD/Box.

The remote control and the Satellite LCD/TV/DVD/Box don’t work / does not respond action

Unplug your Satellite LCD/TV/DVD/Box from the mains for a few moments and plug it back in.

The colors aren’t natural / Black & White pic. action
• Check that the AV cables are correctly pushed into the socket of the various devices.
• Check if the TV supports PAL. If Both NTSC & PAL is available, switch to PAL.

No Sound action

• Check if the sound is muted (press the unmute button)
• Check that the AV cables are correctly pushed into the socket of the various devices).

The sound is very low or inaudible. action

• Check the volume of the TV set.
• Check the volume of the Satellite LCD/TV/DVD/Box.

Pay Channels not available. action

• Check the subscription details.
• Please also check if Satellite Card is correctly inserted or not

Airtel Digital Tv Troubleshooting You can repair your Airtel Digital Tv

airtel digital tv hd, airtel digital tv recorder, airtel reviews, airtel hardware,airtel digital tv know, airtel digital tv features, bharti airtel announced airtel digital tv, airtel digital tv reset

No picture, No Sound and no front panel display

possible cause
Set-Top box is not plugged into the mains or is not switched on.
action
Check mains connections. Press to ON/OFF button on the front of the STB.

No Picture, No Sound but the front panel shows the display.

possible cause
The receiver is on Standby.
action
Press on the power button "stb" on the Remote control to bring the Set-Top box out of standby.

No Picture, No Sound but the indication on the front panel of the Set-Top box is correct

possible cause
1. You are watching TV through your cable operator, Aerial connection or VCD, DVD player.
2. The AV connection are wrong.
3. The connections are right, but the TV is not connected up to external AV source [AV1, AV2 or DVD]
4. The cable connections are may be faulty [damaged, broken] or missing
action
1. Press the AV button on your remote.
2. Check the AV connection in the STB.
3. Check the TV's AV connection.
4.Check all your connection and consult or call us.

Irregular or bad reception

possible cause
Problem with cable connections. [damaged, broken connection or wires]
action
1.Check all the connections and cables.
2. Contact customer service.

A blank screen comes when you choose some services.

possible cause
You are watching a encrypted service or program
action
1. Choose another service or program
2. Contact customer service

The remote works with the TV & not with my STB.

possible cause
1.You need to reset your remote control.
action
1.Press STB on your remote control to control your STB
2.Refer this guide to program your remote

The remote control does not operate.

possible cause
1.Your STB may be off.
2. There are no batteries or the batteries may have become flat.
action
Make sure you point your remote directly towards your STB and nothing is between the two.
The remote command light on your STB and on your remote control should flash each time you press a remote key.
If neither light flashes, check batteries in you remote and if your STB is plugged to mains.

I have forgotten my PIN

Call customer care to have your PIN reset

I cannot close the electronic programme guide

Press exit key on remote.

DISH TV AND TATASKY PROBLEM SOLUTION

dish network receiver problems dish tv connection problem dish dth dish tv troubleshooting dish tv no signal dish tv installation dish receiver troubleshooting dth dish tv offers tata sky hd problems tata sky problem in rain tata sky signal problem tata sky signal problem during rain tata sky remote problem tata sky troubleshooting

Dish TV

101- Unsubscribed channel
201 - Card refresh error
301 - Signal not found
302 - Signal unavailable
303 - Re-install services
401 - VC not inserted
402 - Faulty Viewing Card
501 - Conditional Access
601 - Go HD with dish TruHD
102 - Viewing Card Deactivated

Dish TV Error code 101,102, 202,301, 302, 303,401, solutions

Dish TV stb common problems and solutions

TATASKY

Your digicomp is not switching on / you can't see anything on your TV.

possible cause
Your digicomp is not plugged into the mains / your digicomp is switched off (the standby light is red).
action
Make sure the mains lead is properly plugged in and your digicomp is switched on/ press power on your remote control.

Your remote is not working..

possible cause The batteries are dead or something is between the remote and your digicomp .

action Make sure you point your remote directly at your digicomp and that nothing comes between the two. The remote light should flash on your digicomp and on the remote each time you press a remote button. If neither light flashes, check the batteries in your remote.

You are not receiving any channels.

possible cause Your Subscriber Account may be overdue / your service may have been deactivated.

action Press Yellow button on your remote to check your account status and payment due date. If need be, buy a Tata Sky Recharge.

You are not receiving a particular channel.

possible cause You may not have subscribed to this channel.

action Call the Tata Sky Helpline to order the package which has this channel.

You can't find a channel you have watched previously.

possible cause The channel only broadcasts for part of the day.

action Press Guide button on your remote to check the timing of the channel.

You've forgotten your Parental PIN.

action Call the Tata Sky Helpline to reset your PIN.

dd-direct-plus-frequency

stc-free-dish-channel-search

how-to-optic-fiber-cabale-splicing

how-to-get-peace-of-mind-channel-free

Dish TV problem solution part 2

dish tv2 remote not working

dish tv2 channel

how to set up tv2 on dish network

dish joey remote not working

dish tv 2 not working

tv2 on dish network not working

Q-  Update DISHTV TOLL FREE NO JUST A MISSED CALL!
A- Dishtv all info,, Now missed cal on no.18002749000 on sms!
only for dishtv subcriber & miss coll from registerd mobile no
I am using tata docomo for dish tv cc at 10p/min(LL).
Q- Help Switch to Dishtv to Videocon D2H
A- Very good decision, Iam already face this problem, They are not add more malayalam channels. still dishtv get 16 tv channels. 
only change u r dish tv stb and dish"s diraction nss6 95.5 to st2 88 digree.  

dish tv problem solution

Q- how pairing of VC in other set top box of dishtv ?
A- send a mail to customer care mentioning your old and new STB at customercare@dishtv.in
they will pair your STB with card. 
Q- Old Dishtv STB Not Working Properly So Can i Use New STB with inserting of Old VC.It's Working are not ? Because OLD VC Active For 3Years FTA Pack...
A- your  pack will got deactivated when u change ur stb ...stb can be paired to the old vc
Q- Help How to downgrade firmware dishtv stb = I.m using dish tv zenega 1004is receiver I using old firmware this receiver but this receiver not supported com port so friend help me how to downgrade firmware and flash old firmware without com port stb
A- DOWNLOAD LOADER AND

1. RS 232 CABLE CONNECT

NOW FOLLOW THESE STEP
Y…2. OPEN LOADER AND UPLOAD DATA SAVE FILE RENAME STB ***** NUMBER 5 DIGITS FOR EXAMPLE (12345.bin) AS SHOWN FILE 322KB

3. NOW ONCE AGAIN OPEN LOADER SELECT DATABSE OPTION AND SELECT BOOTING FILE THE STB PROCESSING AND YOUR SET BOC DEAD BUT DONT WORRY

4. NOW ONCE AGAIN OPEN LOADER SELECT PROGRAME DATA AND STB PROCESSING FINALLY YOUR STB BOX FREE TO AIR FOR FOR ALL SATTELIATES
THIS FILE ONLY WORK IN DISH TV ZEINGA 1004is ONL

Download Link.......

http://www.mediafire.com/download/cvroq7wvpudehj1/%5BMegafileupload%5Dboot%2520zenega.rar


Q- Help DishTV Zenega CD1004is signal problem = I have a zenega CD1004is receiver ( soft ver 4.72 ), in which i am receiving 11038 H signal ( 65 % ) ,but home transponder ( 12688 V ) and all other frequencies are 2% to 3% percent signal quality. I tried resetting to factory default. Tried STB to STB software download ( using RS-232 null cable ) But the problem remains.
I confirmed that my LNB and Cable are ok by connecting another working Zenega CD1004is receiver , it was receiving over 65 % signal on all frequencies.
I opened receiver and checked for Leaking and bulging capacitors, but did not find any. Now i made 11038H my home transponder and i'm receiving 10 to 12 channels... But how to get back the other V and H frequencies ?
A - Please change Symbol Rate from 27500 to 3000 for TP 12688 (Hor), 12647 (Hor), 11172 (Ver) and see if any improvement in Signal Strength and Quality. To do so, press BLUE button on selected frequency in the Home Frequency Screen or you can change it manually.
Press 9523 to change the frequencies if you want only.
Apart from that don't change if there is no real need....
And did you try a receiver in the place where this box is fixed? 

ONIDA ULTRASLIM 250 MODEL- CI21SMP250B-R

A complete parts list of ONIDA ULTRASLIM 250 MODEL- CI21SMP250B-R. With circuit diagram ,
service code, system ic, croma ic, memory ic, power, smps transformer, eht,
horizontal output , horizontal oscillator coil, vertical ic, audio ic, tunner,
Remote, service mode and many more....



SYSTEM + CROMA = TDA12155/H/N3/3/AK3

MEMORY = SMALL SMD MEMORY

POWER = STR W6756

SMPS TRANSFORMER =  IJTSBIJBIRI EWIMS412B0-M01B

EHT =  BSC26- 1588

HOR O/P =  C5929

HOR OSC COIL =

EW - JCS 630F



VERTICAL =  LA 78141

AUDIO = TDA 7266

TUNER =  TEA G025D 1007A2111

REMOTE =  RP13

SERVICE MODE =

VIDEOCON MODEL - CTV VHN14 MBF- CNA

A complete parts list of VIDEOCON MODEL - CTV VHN14 MBF- CNA. With circuit diagram ,
service code, system ic, croma ic, memory ic, power, smps transformer, eht,
horizontal output , horizontal oscillator coil, vertical ic, audio ic, tunner,
Remote, service mode and many more....



SYSTEM + CROMA =  LA7693K 7N 5AZ9

MEMORY =  24C16

POWER = TRANSISTOR

SMPS TRANSFORMER = BCK- 36- 0494 BCK 60-01VA

EHT = BSC 24-01N 402810, BSC24 -01N 4095A

HOR O/P =

HOR OSC COIL = BCT- 055A

VERTICAL = LA 78040

AUDIO =LA 42071

TUNER = 7053B (PLLY ) LONGSIGN

REMOTE = V-TFT

SERVICE MODE =