AIWA MODEL NO –TV 201 FAULT -POWER SUPPLY OUTPUT VOLTAGE IS LoSS OR EXCESS

AIWA MODEL NO –TV 201 FAULT-NO EHT POWER SUPPLY OUTPUT VOLTAGE DROPS

AIWA MODEL NO –TV 201 FAULT-NO EHT POWER SUPPLY OK

AIWA MODEL NO –TV 201 FAULT-IC 801 STR58041A OVER HEATS BLOWS OFF

AIWA MODEL NO –TV 201 FAULT-HORIZONTAL OUTPUT TRANSISTOR Q602 2SD1555 OVERHEATS OR BLOWS OFF

Entering into service mode MODEL- CTV C202

 COLOUR TV SERVICE CODE AKAI

MODEL- CTV C202

Entering into service mode

Press the hidden TEST key hidden under the seal, below key “8” on remote control handset to active the service mode. Once the service mode is activated, screen will display as shown. 1 –AGING, 2-AFT OK, 3- 1234H.

MODEL -CT1419,CT-2019,CT-2159

COLOUR TV SERVICE CODE AKAI

MODEL ; CT-1419, CT-2019, CT-2119, CT-2159,

Entering into service mode

Turn on the TV set power switch while pressing and holding Volume+ ana Volume – buttons on the front cabinet.

MODEL CT-2579, CT-2979

MODELS: CT-2579, CT-2979

ENTERING INTO SERVICE MODE

Turn on the TV set power  switch while pressing and holding program + and program – key ; simultaneously on the front cabinet.

BUSH-AKAI SERVICE MODE

COLOUR TV SERVICE CODE

BUSH/ AKAI COLOUR TELEVISON RECEIVER

Model: CT- 147 MK-II, CT-147R MK-II, CT- 217 MK-II, CT-217R MK-II, CT-207 MK-II, CT-207R MK-II, CT-21W9

For entering into service mode

Simultaneously press DISPLAY button on the remote control handset and VOLUME button on the front panel of the television receiver. To select any parameter; user P+ and P- buttons . To change the value of any parameter; use V+ and V- button. To exit from the service mode Switch of the TV and then switch it on.

AKAI MODEL CT 2119

COLOUR TV SERVICE CODE AKAI

MODEL – CT- 2119

For entering to service mode

Switch on the TV woth pressing “+” and “-“ buttons on the front panel of television receiver. Controls in sevice mode VOL+/VOL-,CH+/CH-. To Exit from service mode: press STAND BY

AKAI COMMON MODEL SERVICE CODE

COLOUR TV SERVICE CODE

AKAI COLOUR TELEVISION RECEIVER

MODEL – COMMON MODEL

for entring into service mode

Press DISPLAY button on the remote control handset and VOLUME button on the front of television receiver simultaneously.