Monday 18 January 2016

HOW TO REPAIR OPTICAL NODE AMPLIFIER

When we going to repair a Node Amplifier we need a optical signal for in put to node and get RF signal for reception.
First get a Optical Transmitter.
Second get a Hybrid Rf Amplifier
If you have fr signal 80dB then ok if  lower then input to hybrid amp and adj to out put 80 dB signal.
Then this signal give to Rf input of optic Transmitter .
Then out optical signal through a patch cord.
And give this signal to Optical Node Amplifier.
Now out from node Rf about 88dB ~ 95dB
 I show u some parts which are defective in many cases.
Optic to RF converter, if optic signal in and rf signal not out then this is may be defective.
If rf signal in in pin no 1 and dont reach + 30dB of input signal then change it.( RF SIGNAL AMPLIFIER KF829-24 )

If reach 30v dc to regulating ic pin no 1 and no out put/ low out put to 24 v dc in pin no 3 then change it. ( REGULATING IC 7824 )

If a black wave on tv screen then change this capacitor 1000uF/ 63v

If optic signal not out to optic ic then change it. ( OPTIC ADOPTER )


If any question about repairing u can comment in bottom comment box.























Searches related to HOW TO REPAIR OPTICAL NODE optical node price optical node transmitter optical node circuit diagram optical node function ftth optical node solar optical node catv optical node arris optical node

4 comments:

  1. Sir, if Transformer gives 30v but at the input of the regulator ic shows 19-22v only what wiil be the part is faulty as I be already replace Amplifier IC & Fiber ic capacitor & Regulator ic also, its 1000mhz 3IC with 4output.

    ReplyDelete
  2. if transfermer amp is low or in4007 diode /pf used in bridge rectifier /2200uF/50v capacitor/ 7824 regulator / shorting or loading on ckt .

    ReplyDelete