HOW TO SEE C BAND CHANNEL ON VIDEOCON D2H

Remember that you almost use

Use Free Videocon D2H SatlitteBox 1011 Receiver-

 

how to find your videocon dth receiver (stb) advanced password??

(4th, 6th, 8thand 10th digits of your VC CARDnumber) 

 

Use Your Videocon D2H STB as FTA Receiver –

 

Go to – Menu – Setup –
Installation
Enter installation code 1234
Box settings – Satellite
management – Enter advance
settings password (4th, 6th, 8th
and 10th digits of your VC CARD
number)or see this
Press yellow key on your remote
(ADD SAT option in satellite
management)
Enter sat name or simply press
ok
Make sure that LNB type is
universal; LNB power is ON, 22
kHz on and Scroll down to
transponders and press ok to
EDIT TP
Save satellite settings and press
yellow key remote (ADD TO
option on transponder edition)
Enter the frequency 10600 and
05150 and press ok
Select polarization to V OR H, FEC
to ALL, enter symbol rate …………..
and save the settings you have
entered.
Check for signal strength and
scan the satellite. Then you will
get channels.

 

After reading technical Review of Videocon d2h Review By aDnscan.com we are sharing a guide to watch FTA Channels on Videocon D2H. The TRAI regulations under which the dth licenses requires that the STB be of open standards and should not be blocked and be allowed to view the services of any other operator or services of Doordarshan after the end of subscription period, Unless it is given under a rental scheme or the customer has moneys due to the operator, We know from experience that none of the other operators actually follow this rule and do everything possible to stop the customer from viewing anything , by blocking the STBs, Let us see if D2H is any better in this regard. D2H gives you proper bill for your STB on purchase, I was surprised to see the box actually working without inserting the card, It asks for the card only when it finds a scrambled channel , So decided to connect it to my DD-Direct+ dish and gave it a go, All i needed was to go to the Box settings-satellite management menu and add a satellite, It was pretty easy, Just click the Add satellite button and this screen comes up

 

 

 

 

 

 

Press the green button to Edit the satellite name

Make sure to click the accept button and press ok , A new satellite was created. Now we have to add the Tps for that satellite and do a scan,

Here are the results, It actually does a network scan and finds all Tps, even though you scanned only one TP

Click yes here and the box adds all of them to menu, Mostly channel numbers from 1-99 and 1000-

However you need to some mathematics for adding c-band channels , The box has no autoscan feature, Also selecting the lnb type as c-band, makes no difference, The box is not designed to scan the c-band IF range or it has some software bug, stopping it from scanning c-band Tps
So the old tried and tested method, needs to be used , Let us say we want to add Luxe-tv from Asiasat-5 , one of my favorite channels,
Well the frequencies to add is
TP – 4000
SR – 28125
FEC-3/4
POLARITY—-H

 

Adding these values after selecting the LNB type as c-band wont bring any signal, But do this if you want to add this channel
First subtract the TP frequency from 5150, I.E the lo frequency of c-band, you get
5150 -4000 = 1150
Now add this value to 9750, ie 9750 + 1150 = 10900
Now select LNB type as universal and add this value as TP frequency, Just that since the box fails to do high side injection for c-band and find IF values, we do it manually and tell it how to find the IF
now, scan the TP, note that there is no need to change SR and FEC values, they are same

So that gives you the signal and scanning it gives you the channel

Here is a screenshot from Asiasat c-band,